RED OXIDE PRIMER

An alkyd based primer used for the protec­tion of prepared steel surfaces in mild industrial or commercial environments.

• Matt Finish
• Single component fast dry
• Fast drying properties

ZINC PHOSPHATE PRIMER (ALKYD)

A fast drying alkyd primer containing zinc phosphate anti-corrosive pigmentation, used for the protection of structural steel in mild industrial and commercial environ­ments.

• Non-toxic
• Fast dry coating
• Anti-corrosive
• Lead free primer
• Easy Application

HB ZINC PHOSPHATE EPOXY PRIMER

Hi-build two component general purpose industrial primer that contains Zinc Phosphate for corrosion inhibition. It is recommended as the standard heavy duty primer for suitably prepared steel surfaces.

• Non-toxic
• Strong Corrosion Resistant
• Good Chemical resistance
• Solvent resistant
• Hi-Build per coat

ZINC RICH EPOXY PRIMER

A two component polyamide cured epoxy primer which incorporates a high level of finely divided zinc to provide excellent corrosion resistance as a shop or pre-weld primer to prevent corrosion on blast cleaned steel.

• Hi build
• Strong Abrasion resistance
• Resistance to crude & heavyoils
• Strong corrosion resistance

ETHYL ZINC SILICATE PRIMER

A two component, moisture-curing primer recommended for use as primer coat for under­neath specified topcoats in the most aggressive industrial and marine environ­ments.

• Excellent resistance to water
• Excellent resistance to sea water
• Resistance to organic solvents
• Heat resistance up to 450oc

EPOXY HB LINER

This is a two component polyamide cured epoxy coating. It is a high solids, high build product, designed to improve barrier protection as a mid-coat (intermedi­ate)/topcoat in systems for various atmospheric conditions

• High Build
• Strong chemical resistance
• Low VOC
• High abrasion resistance

MIO EPOXY FINISH

A two component polyamide cured epoxy coating with Micaceous Iron Oxide pigmentation which displays outstanding durability and abrasion resistance. Cured film resists moisture penetration with minimum chalking or deterioration. Designed for protection of steel structures in aggressive marine and industrial atmosphere.

• Hi-build
• High Abrasion resistance
• Excellent water/salt water resistance

SYNTHETIC ENAMEL

Synthetic Enamel is a tough, gloss/matt finish based on durable alkyd resins and provides good durability and weathering resistance in generally mild industrial, environments.

• Tough and durable Good weather ability
• Availab le in matt and gloss finish Anti – corrosion properties
• For Interior /exterior use

COAL TAR EPOXY FINISH

A high-solid, polyamide-converted epoxy that includes refined coal tar pitch which forms an extremely durable coating. It is recommended for both new construction s and maintenance in moderate to severe atmosphere, marine and mild chemical exposures, as well as under ground coating.

• Excellent abrasive strength.
• Chemical resistivity.
• Water resistant barrier
• Excellent corrosion resistance
• Self-priming hi-build coating Top coat/Primer

POLYURETHANE FINISH

A high chemical resistance and is particular­ ly suited to surfaces where high durability is required. It is a versatile coating with excellent gloss retention and UV resistance.

• Excellent weather-ability
• Easy application
• Excellent gloss and color retention UV Resistant
• Tough and abrasion resistant
• Good chemical resistance and durability

DTM – SURFACE TOLERANT EPOXY

Recommended for the protection of steel structures in harsh chemical atmospheres as well as in aggressive marine environments.

• Excellent abrasive strength
• Strong chemical resistivity/salt water resistance
• Water resistant barrier
• Excellent corrosion resistance
• Self-priming/ hi-build coating

SURFACE TOLERANT GLASS FLAKE EPOXY

A two-component, high solids Glass flake epoxy coating for use in moderate to severe environments. It is specifically designed for application directly on sound rusted steel with minimum surface preparation.

• Self-priming formula
• Excellent resistance – (chemicals, Abrasions, impact and solvent)
• A very stronge barrier coat.

HEAT RESISTANT ALUMINUM FINISH (250-300°C)

A sing le pack heat resistant general purpose finish pigmented with/ without aluminum flake. Designed to be a heat resistant coating for primed steel structures subject­ed to temperatures up to 300°c.

• Excellent heat resistant properties
• Good resistance to abrasion Weather
• Good resistance to Moisture
• Easy Application

HEAT RESISTANT COATING (UPTO 450°C)

A metallic flake filled finish based on a highly durable silicone medium designed to give excellent resistance to heat and weathering. The finish also provides maximum brilliance and reflective properties

• High heat resistance
• Anti-corrosive
• Silicone based

HEAT RESISTANT COATING (UPTO 650°C)

A metallic flake filled finish based on a highly durable silicone medium designed to give excellent resistance to heat and weathering. The finish also provides maximum brilliance and reflective properties

• Good moisture resistance
• Anti-corros ive properties
• Temperature resistance OPI-650oC

PHENOLIC EPOXY PRIMER

A two- component, high solids epoxy coating for use in moderate to severe environments. It is specifically designed for application directly on sound rusted steel with minimum surface preparation.

• Direct to metal
• Self- priming formula
• Excellent resistance – (chemicals, abrasions, impact and solvent)

PHENOLIC EPOXY FINISH

A high-build, two component epoxy finish with excellent chemical resistance properties.

• Excellent chemical resistance
• High build- Can b uil d up to 1000 microns
• Excellent barrier properties

Apexior No. 1

Apexior 1 is a single component, easy to apply an air dry coating formulated to deal corrosion prevention with hot water on metal surfaces. It is resistant to continuous immersion in boiling water and steam from 95 oC to 540 oC.
It is ideal for,

• On boiler drums, tubes
• Water walls
• Evaporators
• Steam turbine casings
• Water softeners in contact with hot water above 93 oC min

Apexior No. 3

Apexior 3 is a single component VOC complaint, easy to apply an air dry coating formulated to deal corrosion prevention with waterside on metal surfaces. It has an outstanding wetting properties & adheres well to power tooled clean metals. It can resist to continuous immersion in fresh or saline water as well as wet or high humidity environments. It is resistant to continuous immersion in boiling water and steam up to 93 oC.

It is ideal for,

• On boiler drums, tubes
• Water walls
• Evaporators
• Steam